1. 使用山东包装机
时，要将机器放在平地或平面桌上不能使机身发生倾斜;
1 the use of packaging machine Shandong, will put in the ground or machine cannot make body inclined plane on the table;
2.开机前要仔细检查所有储液罐、传送带、储盖轨道是否有杂物，链板转动是否正常;
2 before starting to carefully check all the liquid storage tank, conveyor belt, reservoir cap track whether there is sundry, chain plate rotation is normal;
3.将灌装机插好220v电源，并检查安全功能是否正常，水、电、汽三源是否接通，不能有异常震动及响声。机台在运转时绝对不能进行调整;
3 will be filling machine plugged in 220V power supply, and check the safety function is normal, water, electricity, steam source are switched on, cannot have the abnormal vibration and noise. The machine in operation when the absolute cannot be adjusted;
4.待各项条件准备好运行情况稳定后，放好原料桶及待灌充瓶等容器方可将设备电源开关打开;
4 for each condition ready for operation in stable condition, put the raw material barrel and for filling bottles and other containers will be open the power switch equipment;
5. 根据山东包装机液体量调整灌充、间隔时间的数值;
Value of 5 according to the Shandong packaging machine liquid filling, adjust the amount of the time interval;
6.运行时，不要让工具或其它物体接近同时必须有人进行监控;
6 run time, don't let tools or other objects near simultaneous someone must monitor;
7.所有使用机器的人员严禁穿戴可能被运动部件挂住的衣物,长发者，应戴发罩；
7 all use the machine person is prohibited to wear may be moving parts on the clothes, long hair, should wear a hair covering;
8.禁止与操作及维修无关的人员接近山东包装机，杜绝工伤发生;
8 the ban has nothing to do with the operation and repair personnel near Shandong packing machine, avoids injury occurred;
9.停止使用机器时可在机器灌装处或控制箱处按停止按钮，停机后应关掉控制柜主电源。不工作时将液体灌装机开关关掉切断电源。
The 9 stop machines available in machine filling or control box press stop button, after stopping off the main power supply control cabinet. When not working liquid filling machine off the switch to cut off the power supply.
山东包装机